justinhill, Ive got plenty of plexi glass, cutting the right SHAPE just wanted to try a few for freshwater, heading to the river now an TEST again. guess it will take some time to learn. my SHAPE might be OFF . Ill cut more this winter an start over.
GOOD LUCK GOOD PLUGGIN
i would say its more of the angle that you cut in the plug then shape of the lip. ive cut triangle, square, rectangle, they swam almost identicle. what i do too is get the plexi glass to fit snug into the plug and cut a few different lips so you can interchange them. if the slot is a little big just put masking tape on the tip of the lip that is going into the plug so it doesnt fall out when you are testing. i use the swimming pool in my neighborhood haha. let me know if you have any questions. i can get pics too if you want.
justinhill, GREAT INFO. I took him for a swim an all is well, swims GREAT, SEEMS it was the LIP FIRST cast I hooked WEEDS cleaned them off an second cast FANTASTIC WIGGLE,WIGGLE,WIGGLE. I thinking the weight of the lip might have helped also. NOW I know what to do, to do MORE little guys all my SCRAP wood will be LITTLE GUYS, should have a good SCHOOL of them for next season.
GOOD LUCK GOOD PLUGGIN
just wanted to try a few for freshwater, heading to the river now an TEST again. guess it will take some time to learn. my SHAPE might be OFF 
. Ill cut more this winter an start over.
the weight of the lip might have helped also. NOW I know what to do, to do MORE little guys
Hybrid Mode
