Is this the Place?

[eastendlu]

Originally Posted by pbadad

Thanks George on the xray of the A54b. I questioned the model earlier. Now you confirmed what model it is. Mucho grazies. I see you been doing Wadds. Are you conventionally weighting them? Would you like try my maverick way in weighting. It's a little more time but it makes building a fun challenge.

Let us know how that works out if you can.

[eastendlu]

Hi guys and Ted and Sgt. those plugs look .

[pbadad]

Originally Posted by eastendlu

Let us know how that works out if you can.

Lu. This weighting works great. My buddys love the way it casts, fishes and catches. The weight is a 1/4" lead rod 3" long. Approx. 1oz. Pix of blank b/4 turned and a finished turning. A 1/4' dowel is glued in the drilled weight hole b/4 turned.

[ProfessorM]

Originally Posted by pbadad

Lu. This weighting works great. My buddys love the way it casts, fishes and catches. The weight is a 1/4" lead rod 3" long. Approx. 1oz. Pix of blank b/4 turned and a finished turning. A 1/4' dowel is glued in the drilled weight hole b/4 turned.

I will show you my similar way later. I got to go get ready for Church the wife is yelling at me.

[ProfessorM]

Originally Posted by pbadad

Lu. This weighting works great. My buddys love the way it casts, fishes and catches. The weight is a 1/4" lead rod 3" long. Approx. 1oz. Pix of blank b/4 turned and a finished turning. A 1/4' dowel is glued in the drilled weight hole b/4 turned.

ok here is how I do it most times. This was showed to me by Mr. Manzi several years ago. Slip told me it was his idea that Dave copied form him so I don't know which was which and don't care. It works and makes it real easy and I know of a few comm. guys that do it his way now since I showed them where to get materials. Just want to let you know it's not my idea. I keep telling people I never had an original idea in my life but don't let me see it because I can plagiarize with the best of them.
Anyway back to the useful info.
I use hard plastic tubing. The OD is 1/4 inch and the ID holds a tail grommet very tight so the tail grommet won't slid around on you. You can use it in any combo you want. Wgt., plastic, wgt, plastic. 1 wgt then plastic. Pretty much any way you want so no dowels and gluing and re drilling. In the last pic you see some larger stuff. 3/8 OD for larger weighting . You then take the 1/4' stuff which happens to fit nice and perfect into the 3/8 stuff and then the tail grommet fits into the 1/4" stuff. You can see I have 100 foot rolls of the stuff, enough for 5 lifetimes of needles but the stuff is very cheap and that is how it is sold. It took some searching to get the right wall thickness but here is the place I got it. Just make sure you get the right wall thickness. If you need help just ask and if you want to try a little let me know and I can send you some as god knows i got plenty.

LDPE and HDPE Tubing. | U.S. Plastic Corp.

[eastendlu]

Excellent post Paul so much to learn so little time.

[Grapenuts]

you can also buy the same thing in hard nylon [spacers] in different inside an outside dia...at the hardware stores in all those little side boxes...been useing them for years in rod building when I need more or less space between the spring that holds the different size thread spools......if you don't need a big coil that is.