Location: Reading Mass/Newburyport/merrimack river
Posts: 3,749
Now trace out you lexan lip,I use 1/8" lexan for these, I cut mine on a schroll saw with no issues, but a band saw or coping saw will work nicely, be sure to test fit all parts, especialy the lip, I ususly need to work the slot wiht some #80 sand paper to get it to fit snugly..
Location: Reading Mass/Newburyport/merrimack river
Posts: 3,749
Once every thing is test fit, seal prime and paint....
Now install your swim lip, I use marine grade 60 minute 2 part epoxy to secure the lip, I also add a drop to the 3/4" long screw eyes as an added precaution..
These are great littl plugs for the first arrival schoolies, I've also had theinjhaled by fish considerably larger and they held fast....
Hybrid Mode
