Can you help me ? My hole is crooked ... - Striper Talk Striped Bass Fishing, Surfcasting, Boating

Charleston · 05-17-2006, 08:51 AM

Great info, one question however;
When you rip the plug in half using the Vblock, how do you do it without riping the Vblock in half as well?

I assume this is an ISO 9001 procedure

ProfessorM · 05-17-2006, 10:02 AM

Thanks Ed for answering my question.

vineyardblues · 05-17-2006, 10:16 AM

GO TAGGERMAN

VB

Tagger · 05-17-2006, 02:51 PM

Quote:

Originally Posted by Charleston

When you rip the plug in half using the Vblock, how do you do it without riping the Vblock in half

Bill,,,I ripped some pine 45 degrees on the table saw and glued and screwed it to the plywood..I clamp that in place on the bandsaw table centered on the blade... push whatever I want to split through.. falls off other side .. I also have an off center placement on this board I set up to do lips on round stock ..

fishaholic18 · 05-17-2006, 04:13 PM

Quote:

Originally Posted by Tagger

Bill,,,I ripped some pine 45 degrees on the table saw and glued and screwed it to the plywood..I clamp that in place on the bandsaw table centered on the blade... push whatever I want to split through.. falls off other side .. I also have an off center placement on this board I set up to do lips on round stock ..

Still don't get it? The V-jig thing that is, can u do a close up pic Ed?

Tagger · 05-17-2006, 04:37 PM

I just threw it on the table... I clamp it in place when I use it.. U can use to for drill press too ... dowels ..

fishaholic18 · 05-17-2006, 04:52 PM

So, the V-block stays there and you push the plug thru it.
I get it now. Thanx

justplugit · 05-17-2006, 08:09 PM

Eddie when your pushin a danny or surfster thru the block to do the lip how are you holdin the uneven plug to prevent the chatter.

Thanks.

Tagger · 05-18-2006, 03:38 AM

Quote:

Originally Posted by justplugit

Eddie when your pushin a danny or surfster thru the block to do the lip how are you holdin the uneven plug to prevent the chatter.

Thanks.

sorry,,have slotted dowels,, hydro orien presents new problems from working with square stock.. probably make a jig for that ,,holds plug on its side,,,start with prophile block like above.