Breakaway Clips

[basswipe]

At first I really didn't like them but in the end I found them to be the best for changing plugs when its cold and when you have gloves on.And most importantly when its dark.I also use the coastlocks just as much.

Now I do not like the duo-lok snaps at all.To many failures when I used them.

[Sea Dangles]

Give me the 100 lb. coastlock for dependability.

[spence]

I make my own out of 7/0 tungsten wire.

-spence

[tattoobob]

I tie directly and never had a problem, it is just another link in the chain that could fail. If I do use a snap it is a 90 pound duro lock and I haven't had a problem yet.

[Sea Dangles]

Originally Posted by spence

I make my own out of 7/0 tungsten wire.

-spence

Are you serious? Any pics?

[Goose]

I guess they would open easy if your drag where to tight or hung up on something. They been good to me.

[ThrowingTimber]

go to radio shack. Get yourself some shrink wrap tubing. Cut yourself a small section of the tube. get small diameter. slide tube onto clip as you would a lure. angled bend is on the bottom as you hold the clip. now shimmy that small piece of tube up around the bend at the top. after you clip a lure on shimmy the piece of tubing over the angled portion of the snap. Its just a bit of extra insurance. Personally I did lose a fish on a head shake with them and this will help reduce that. The thing with the clips is that you get soo used to them you dont swap them out often enough. I would never fish a coastlock type clip on two dif trips, but I had been with the breakaways, I guess I got a lil greedy. adding the piece of tubing to form a simple sliding lock and replacing frequently should reduce the fish lost to head shakes. In the fall when I was pretty set on what I was using, I would clip on my plug hold the clip with pliers and hit the shrink tubing with my lighter. The operation itself in type seems more complex than it actually is.

[Slipknot]

Originally Posted by ThrowingTimber

go to radio shack. Get yourself some shrink wrap tubing. Cut yourself a small section of the tube. get small diameter. slide tube onto clip as you would a lure. angled bend is on the bottom as you hold the clip. now shimmy that small piece of tube up around the bend at the top. after you clip a lure on shimmy the piece of tubing over the angled portion of the snap. Its just a bit of extra insurance. Personally I did lose a fish on a head shake with them and this will help reduce that. The thing with the clips is that you get soo used to them you dont swap them out often enough. I would never fish a coastlock type clip on two dif trips, but I had been with the breakaways, I guess I got a lil greedy. adding the piece of tubing to form a simple sliding lock and replacing frequently should reduce the fish lost to head shakes. In the fall when I was pretty set on what I was using, I would clip on my plug hold the clip with pliers and hit the shrink tubing with my lighter. The operation itself in type seems more complex than it actually is.

THAT'S a pissa idea Vic

I lost 2 pencil poppers in a row to fish one morning due to the clip, I could not believe my eyes when I saw the clip still on but no plug. I went and put splitrings on all my pencils because of that.
Now I wil get that tubing for extra insurance. thanks

[Redsoxticket]

Originally Posted by ThrowingTimber

go to radio shack. Get yourself some shrink wrap tubing. Cut yourself a small section of the tube. get small diameter. slide tube onto clip as you would a lure. angled bend is on the bottom as you hold the clip. now shimmy that small piece of tube up around the bend at the top. after you clip a lure on shimmy the piece of tubing over the angled portion of the snap. Its just a bit of extra insurance. Personally I did lose a fish on a head shake with them and this will help reduce that. The thing with the clips is that you get soo used to them you dont swap them out often enough. I would never fish a coastlock type clip on two dif trips, but I had been with the breakaways, I guess I got a lil greedy. adding the piece of tubing to form a simple sliding lock and replacing frequently should reduce the fish lost to head shakes. In the fall when I was pretty set on what I was using, I would clip on my plug hold the clip with pliers and hit the shrink tubing with my lighter. The operation itself in type seems more complex than it actually is.

TT, once the lure is clipped into the breakaway w/ the shrunked tubing then how do you get lure off ?

Do yo cut the tubing or slide the tubing back over the bend that is if the tubing was not shrunked to much ?

[spence]

Originally Posted by Sea Dangles

Are you serious?

Not remotely. A clip made out of that would weigh about a pound!

-spence

[Bronko]

I swear by the breakaway clips, just the thought of them makes me want to buy more in bulk.

[Mr. Sandman]

I have actually pull tested them on a plug with a triple ring and owner trebles, the ones I got came from England and they are not the weak link. 50# PP will break first. I like them. The are not as bulky as the coastlocks and stronger then the crosslocks.
it takes a nack to pyt a plug on in the dark with those...the first night you end up cursing them.