Quote:
Originally Posted by bloocrab
I need to "finish" the underside of a part of my deck... what material was used to do that Bob? Are those 1/4" sheets of flat pvc? I was thinking of using the pvc beadboard sheets but still not sure, also, how was it trimmed out? are they sitting directly on the seams or inset between the seams? any details would be greatly appreciated
|
We used 1/2" thick 4x8 sheets of flat pvc.....(in stock at DBS)
First we got all the sheet stock pvc, screwed and plugged to the bottom of the floor joists...we then covered the seams where sheets are butted and the perimeter with batten strips of 3/4" x 2 1/2" pvc.
.... you might want to consider using the pvc t&g beadboard....not the 4x8 sheets......it's 1/2" thick x 5" wide ...it would a little easier to install than the sheets especially if doing by yourself. I got a piece in the shop so i went out a took a picture for you.
You can blind nail it and not need screws and plugs.
Threaded Mode