Coffered ceilings - Striper Talk Striped Bass Fishing, Surfcasting, Boating

Rmarsh · 10-24-2018, 05:34 AM

We had a job doing the finish work on the renovation of a very old historic building. I was sent to inspect the existing trim we would have to match. I was amazed because there were moulding profiles i had never seen before...really odd shapes. I cut small samples off the existing trim, went back to my cad program and kept drawing and printing until I got a perfect match. Those knife profiles were a one off and never used again.

Rmarsh · 10-26-2018, 04:35 AM

Boss says he wants a PVC lantern post for every house in the 54 lot subdivision. We are only just starting so I'll do six at a time. In that second picture it looks like porch roof columns for my shop, they just happen to be the same height by coincidence. Walpole woodworking sells something similar for around $1,200.

Slipknot · 10-26-2018, 07:53 AM

Nice Posts! Is there a pressure treated 4x4 in the middle?

Here is a shot of a set of stairs I did this summer in maple. It was a lot of work going from carpeted stairs that were closed in, the left wall was opened up and an LVL put in.

Slipknot · 10-26-2018, 07:56 AM

And here is a set of stairs I helped out with. My friend made almost all the pieces shown including the wall panels. Very complex foyer and a ton of money, but it looks killer.

Rmarsh · 10-27-2018, 05:24 AM

Quote:

Originally Posted by Slipknot

Nice Posts! Is there a pressure treated 4x4 in the middle?

Here is a shot of a set of stairs I did this summer in maple. It was a lot of work going from carpeted stairs that were closed in, the left wall was opened up and an LVL put in.

Beautiful work Bruce! Looks like you made the newel posts yourself?
I like the metal balusters too.....those pitch shoes did get slid up against the railing and tightened with a set screw...I assume

Yeah the lantern posts are hollow...they will slide down and over a pressure treated post that is dug into the ground and set in concrete.... with room for a wire.

Slipknot · 10-27-2018, 11:39 AM

Thanks, no those maple newels and the one narrow one upstairs(not in the shot) were bought by the homeowner, I don't like the radius on the raised panel look to them, done with router obviously and looks good to them but cheap to me. and yes those shoes will be brought up, he was still polyurethaning.