Spreader lights Switch question

[piemma]

Originally Posted by wdmso

so i have the new 2 switch unit it pre wired it has a ground and positive

My old switch was just a 2 pole

When the Dealer installed the VHF radio he tapped into the positive (power wire coming of the my original switch and the Ground into my Horn ground .

Of course I have Zero slack in any wires and zero angle to get 2 hands in the box ..

but let's say I could How do I power the switch system and the light if their using the same hot wire

or should i just throw on small fuse block ?

Be safe, no worries= small fuse box.

[wdmso]

Originally Posted by piemma

Be safe, no worries= small fuse box.

Going to look into the fuse box
Run power cables
Posted from my iPhone/Mobile device