Which Lathe do you own?

[Bob Thomas]

While doing my research for a new lathe, I was going blurry eyed sorting through the threads between Delta and Jet and finding others I had to look up.

I would be interested in seeing what everyone has in a poll form. Maybe an explanation as to the good and bads or something? If not, just banish me to the "guy has wayyyy too much time on hands" forum please

[Diggin Jiggin]

I've got the delta midi, it's a nice machine.

On my Midi I do plan on swapping out both the centers that came with it, and I will also be picking up a longer tool rest.

The centers that come with it are ok, but I want to get one of the drive centers you dont have to remove and pound into the blank, and the tail center is large diameter and not tapered so you can't work the tail without leaving waste on the tail end.

The tool rest that comes with it is 6" and 8 would be better.

[Young Salt]

have the delta and my only -minor- complaints are the placement of the switch and the location of the motor.


haven't tried any of the others so i cant comment on them........


my previous wood lathe was a home-made ones by my great-grandfather's brother ( yeah one of those deals ) who never had one of those fancy 'formal' educations

[stripercrazy]

I got a jet and love it but to do it again I'd get the delta so I can put a duplcator on the back. both lathe are good and will do the same work. I heard delta's easyer to get parts

[PNG]

If you have more than three, do you need to go into counseling

[Tagger]

could only vote once .. Delta and Craftsman

[Raven]

Originally Posted by PNG

If you have more than three, do you need to go into counseling

thanks for the chuckle PNG....

Bob Thomas...you might wanna think about where your lathe is gonna go....and how much room you have for it...
and if your "sitting situation" is comfortable for you as you'll be spending some time there... and that may influence your decision as to what to buy. The other consideration is whether or not you ever want to turn anything much bigger than plugs.... and if so which type would be good for either job.

[Karl F]

Anybody else got a old J-Line?

[PNG]

PHP Code:

and if your "sitting situation" is comfortable 


Raven you gave me a chuckle with that one because sometimes one needs to run away from the lathe (or spade bit) really really fast we do try and avoid this but chit happens

[UserRemoved1]

Yep shoulda had two votes. I have the Vega 1553 which is a serious machine, and also have a Jet mini too. Can't beat the Jet for the price and durability.

[MAC]

Originally Posted by #^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&

Yep shoulda had two votes. I have the Vega 1553 which is a serious machine, and also have a Jet mini too. Can't beat the Jet for the price and durability.

Don't forget "christine"

[jomlt9@AOL.COM]

I have the delta real work horse (midi)

[BigFish]

One vote so I put Delta but I got 2 Grizzleys also!

[Charleston]

I have the Jet but the Delta is every bit as good if not better.
I use the steb center with the stock center in the tailstock. I use a fine live center when drilling and the live center is in a popper mouth etc. The stock live center is too large in dia. for that!
You have heard it before but that Turncrafter machine looks equal to these high end midi lathes. Save some money and use it on tooling.

[Fishpart]

I have an OLD Delta 11.5" swing/36" bed with open belt drive. I also have an OLD Craftsman 12" x 36" open bet drive all cast iron. The nicest late I ever used was a very old Oliver.

Salty, I would love to have a Vega