|
Bits
Through drilling with a 5/32 makes it easy since the nose grommet will fit right in....
I have the fuller brad points with the spurs ground off,,, This is a paste from the email they sent me when I ordered them,,,, I found that the 5 3/8" bits are the ones I do almost all of my drilling with on the drill press,,,,
This is from an old post.........
I have even been in touch with W.L Fuller and got a couple of the special bits coming. This was the return email from with part numbers for 5/32 bits.
We have some information for you and a few stock numbers. First, we recommend removing the spurs from Brad Point Drills when drilling through end-grain. The center point on the Brad will then lead the drill straight through the grain. We have Brad Point Drills in the following lengths up to 10" Overall Length.
Overall Length
2-1/16" 25000156
3-1/8" 25100156
5-3/8" 25200156
8" 25300156
10" 25400156
There is no extra charge to remove the spurs on the Brad Points. However, it must be specified at the time of order. These items are on Catalog 25 pages 39, 40, 43, 44. If you have any further questions, please feel free to contact us.
|
Hybrid Mode
