Cleaning before epoxy

[The Dad Fisherman]

Originally Posted by thefishingfreak

i would avoid steel wool arround anything you plan to get wet. boat,car etc. it will be a place for rust to start. bronze wool or scuff pads might be better. just my thoughts

Duly Noted.......I'll switch over to the Scotch-Brite Pads.....never knew this was an issue.

[capesams]

enamel hates laquer
laquer hates enamel
sys3 hates laquer
sys3 likes enamel
sys3 like urathane
use the 2oz. mixing cups rod builders use to mix sys3...their all marked for mixing.....ask Mike cc for them.
use plastic stirring sticks they use in drinks
65 degree's is fine for sys3.