Envirotex or spray epoxy?

[thefishingfreak]

Originally Posted by thefishingfreak

epoxy is better used as a sealer than a finish coat as it never fully dries.
very sticky though and makes a good thick base to fill in grain.

i'm thinking two part epoxy primer/sealer.I forgot about devcon epoxy topcoat etc..
havin' a dumb moment. too many fumes

[thefishingfreak]

8 hrs to dry is nuthin'
my stuff takes 16 hrs. @70 degrees.
every ten degree drop the time doubles 32 hrs @60 degrees, 64 hrs @ 50 etc...

you want something quick to spray on top soze you can wire it hold it touch it etc..... put rattle can clear on it. then wire it, then epoxy,or system 3,or e-tex and let it spin away overnight.

[pbrown]

Slip, How did you conect all those plugs. That looks sweet. Right now I have the same motor but made it so I can dry one plug at a time. Your method looks sweet. Thanks, PB

[Slipknot]

Originally Posted by pbrown

Slip, How did you conect all those plugs. That looks sweet. Right now I have the same motor but made it so I can dry one plug at a time. Your method looks sweet. Thanks, PB

I string them on wire, one long piece of wire.

I like justplugit's, it's compact and with springs, you can place them in there 2 at a time and still touch them up with a brush just by giving a little twist. Nice

reminds me of Jigman's