|
Go up to Micheal's crafts in Warwick and buy a small package of Envirotex clear bartop finish... most of the plugbuilders here are using it to coat their plugs with it... Just make sure you wipe the plug off with denatured alcohol to get any oils from your hands off it before you coat it.. Also, you'll need to attach some wire to the nose and tail loops so you can hang them to dry... you need 2 wires because you are going to have to flip the plug every 10 minutes for a couple hours until the envirotex starts to harden... once it hardens you should be O.k.-
|
Threaded Mode