|
Here is the belly wgt location and the hook locations. You can get dim. from first post blueprint. Tail wgt is 5/16 dia by .600 long. I would drill the front belly hook hole for a large grommet as you will need a long swivel to reach the thru wire, thus it will be a bigger diam. swivel, as it is a pretty fat plug at that point. The original used screw eyes. Thru hole is drilled on center. I put a 1/4" c'bore on front angle to allow for a smoother nose grommet fit. I bandsaw angle and sand in the final dim. at 40 degree angle. This plug will swim pretty deep and with a very nice wiggle. It is a winner and I like this size better than the larger size but that is just my opinion.
|