Quote:
Originally Posted by ProfessorM
Don't forget epoxy hates sharp edges and daters have sharp edges. I break all my corners on all my edges so the epoxy won't draw back off the edges. Might require 2 coats. I have yet to epoxy my darters yet, but all my other stuff has no real sharp edges.
|
Two light coats versus one heavy is a good stategy for a difficult surface, no doubt. This is also how I would do a rod.
Been doing the plugs with one heavy coat. Admittedly, I do have some dust devils showing due to the fact I'm finishing in an open room versus a sealed dryer.