OK.. first, let's just say i'm a novice with power tools.. been using the lathe for about a year.. getting acceptable results... i've got most everything to a level of proficiency that i'm satisfied with EXCEPT the freakin' bandsaw..
here's the problem... i've tried to set it up just like the directions (which are lousy) say.. but i can't cut straight.. last night for example, i was cutting some AYC (2X2's) into lengths to be used on the lathe. no matter how slow i go, or how straight i try to keep things as i move the wood into the blade, the blade seems to torque to one side and make an angled cut... same when i'm trying to do lip slots..
it always turns to the same side... (my right) i've tightened the blade, loosened the blade, adjusted the little fiber blocks on each side of the blade... i'm about to go postal and throw it through the wall!! no wait... that's where my plugs are..
help!!!