Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Canalman · 02-25-2004, 10:43 PM

Eben,

I hope you're wearing a respirator when you use that stuff, it has some nasty stuff in it

. It made me pretty dizzy when I used it... Right Bob?

. I believe It has MEK in it as well... which can be easily absorbed through the skin and has ill effects on your liver etc. So be careful

.

I have been turned on to a new idea... by someone on "That other site"

. I put my plugs in the oven at 220 for 10 to 15 min. And then brush a thin coat odf epoxy on. The heat makes the epoxy flow well and it soaks right into the wood, leaving a hard, waterproof surface. It even flows through the wire hole with a little coaxing.

-DAve

02-25-2004, 10:43 PM	#3
Canalman Calling Jon The Fisherman iTrader: (0) Join Date: Jan 2003 Location: The Sack Of Mass Posts: 2,357	Eben, I hope you're wearing a respirator when you use that stuff, it has some nasty stuff in it . It made me pretty dizzy when I used it... Right Bob? . I believe It has MEK in it as well... which can be easily absorbed through the skin and has ill effects on your liver etc. So be careful . I have been turned on to a new idea... by someone on "That other site" . I put my plugs in the oven at 220 for 10 to 15 min. And then brush a thin coat odf epoxy on. The heat makes the epoxy flow well and it soaks right into the wood, leaving a hard, waterproof surface. It even flows through the wire hole with a little coaxing. -DAve
	Surf Asylum Lures, Custom Lures for the "Committed" Official S-B Sponsor