Ray here's a couple layouts.
These layout were for a Spheros5k
& VS 150
KL30 27" from spool shaft tip.fully extended
KL25 14"
KL16 10"
KL12 8"
KT10 6 1/2"
runners KT10 Spaced no greater than 6" you can progressively space runners i.e. 6, 5.3/4, 5 1/2 5.1/4 5" in any combo that works in dimension left from first KT10.
KL25H 24" from ext spool.
KL12H 35.375"
KL8M 45.625"
KT8 54.5" CHOKE
KT8 runners spaced similar to top layout spacing.
TIP is a #10 ring size.
10-10
Posted from my iPhone/Mobile device
|