View Single Post
Old 05-16-2022, 07:42 AM   #22
pbadad
Registered User
iTrader: (0)
 
pbadad's Avatar
 
Join Date: Dec 2002
Location: North Branford,Ct.
Posts: 7,588
Paul yes cedar wood in water resilient. Honestly I ask myself this question everytime I build with ayc. I do notice while I'm testing an untreated ayc blank it seems to swell a bit. I mike up all my turnings and I recheck after testing. Normally they are sealed before testing but most cases its wired and temporary weighted as is. I really dont favor that process in plug building. Its just something I do. At cut down the soak time to about 10 minutes or so.
I use now regular turps( sunnyside). The pine smell you refer to is pure gum turpentine. If available that worked well. Sealer stinks no matter what. Actually like I mentioned earlier sealing plugs is my least favorite step in building.
BTW I still use on occassion Val oil. With less than a quart left , I'll use it when I need a quick turn.around. < a week of drying. My varnish/ turps is a 2 week dry time. Use to be 1 week but had some bleed issues so Ill do.longer. Hardwoods ...birch 30 minutes. Maple which i try not to use because if its not sealed well use get cracking between the hook holes and weight holes, Ill either double soak ( repeat next day) or epoxy seal ( messy).
Posted from my iPhone/Mobile device
pbadad is offline   Reply With Quote