Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Eric Roach · 01-30-2014, 06:01 PM

Wanted to share something I tried that worked out well -- might help someone out there.

The chip collection box for my Vega didn't have anything to protect shattered turnings from going through the dust collector. I used a steel grate for a while but it was too restrictive and clogged easily, so I thought something thin but strong would be best. Mono came to mind.

I took a dust collector collar and layed it down on a sheet of 1/4" graph paper. I marked the outer ring of the collar at regular intervals and drilled small holes. I used a long piece of 30 lb mono and strung it up and down, left and right, weaving where it intersected, to create a strong mesh.

Best part is the mono barely restricts the airflow.

01-30-2014, 06:01 PM	#1
Eric Roach Big E Join Date: Dec 2009 Location: Seabrook, NH Posts: 681	Monofilament Dust Collector Grate Wanted to share something I tried that worked out well -- might help someone out there. The chip collection box for my Vega didn't have anything to protect shattered turnings from going through the dust collector. I used a steel grate for a while but it was too restrictive and clogged easily, so I thought something thin but strong would be best. Mono came to mind. I took a dust collector collar and layed it down on a sheet of 1/4" graph paper. I marked the outer ring of the collar at regular intervals and drilled small holes. I used a long piece of 30 lb mono and strung it up and down, left and right, weaving where it intersected, to create a strong mesh. Best part is the mono barely restricts the airflow. Attached Thumbnails Last edited by Eric Roach; 01-30-2014 at 06:11 PM..