Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Plug Building - Got Wood? (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=19)
-   -   Professor M (http://www.striped-bass.com/Stripertalk/showthread.php?t=88166)

O.D. Mike 03-31-2015 05:58 PM

Professor M
 
2 Attachment(s)
I need to thank Professor M for all that he has shared with me in the past years. The biggest thing that has changed the way my process goes is the notebook. List sizes, weights, locations for hooks, weights, eyes, slopes, and anything that will help you duplicate the first lure you have made.

I recently came up with a paint scheme that changes the way I go about painting lures. I painted three lures and waited a week to try it again. I looked at the notebook and realized I didn’t write down any of the procedures. I took me another week to figure out what I did and wrote down the steps so I could repeat the process.

As we all know, it’s not only the notebook. When you think of all of the Jigs (sanding, table saw, wire bending etc…) that he shared with SB. They make the process of building lures so much easier and more precise.

O.D. Mike

Nebe 03-31-2015 06:01 PM

Nice ! Looks like a baby bluefin
Posted from my iPhone/Mobile device

O.D. Mike 03-31-2015 06:14 PM

Thanks Eben that was the goal!!!

Linesider82 03-31-2015 06:14 PM

Badass paint job right there!

That is why this site is great, sound advice from quality people. I do the same and then quantify my builds in some manner. I start with the intention, then record the differences. Nothing compares to putting a plug in the right hands for honest feedback.
Posted from my iPhone/Mobile device

ProfessorM 03-31-2015 07:09 PM

Thanks Mike. The hard work was done by you. Always satisfying seeing what others do with the information. My pleasure.
Posted from my iPhone/Mobile device

O.D. Mike 03-31-2015 07:33 PM

Thanks Linesider82!!! There is a lot of information on this site, search for it and you will find it!!!

Your a good man Paul!!!

Piscator 03-31-2015 07:35 PM

Beauty! Nice work Mike you Office Donkey!

JLH 03-31-2015 07:46 PM

Nice plug!

This site is full of great information from Professor M and many others. Definitely helps to shorten the learning curve.
Posted from my iPhone/Mobile device

Eric Roach 04-01-2015 06:52 AM

Very nice, Mike -- that's foil, correct?

ThrowingTimber 04-01-2015 07:38 AM

Looks sick Mike nice job!

O.D. Mike 04-01-2015 04:37 PM

Quote:

Originally Posted by Eric Roach (Post 1069395)
Very nice, Mike -- that's foil, correct?

I haven't tried to apply foil yet, its all paint!

Slipknot 04-01-2015 09:50 PM

Paul is a Prince

Eric Roach 04-01-2015 10:59 PM

Quote:

Originally Posted by O.D. Mike (Post 1069450)
I haven't tried to apply foil yet, its all paint!

Good Lord, then that is some seriously impressive reflective paintwork. Nice job!

Charleston 04-02-2015 10:29 AM

Paul is a great guy. Always glad to help out.

ProfessorM 04-02-2015 11:26 AM

Quote:

Originally Posted by Charleston (Post 1069501)
Paul is a great guy.

Yeah Numbskull, what he said
Posted from my iPhone/Mobile device

O.D. Mike 04-02-2015 06:11 PM

Quote:

Originally Posted by Eric Roach (Post 1069472)
Good Lord, then that is some seriously impressive reflective paintwork. Nice job!

Thanks Eric!!!

pbadad 04-03-2015 06:26 AM

Can't say more about the great and knowledgeable builders on this site. I've been at this obsession for over 10 yrs. Without the help, guidance suggestions from fellows like Paul, I still would be making more firewood than successful lures. Thanks to ALL!!

vineyardblues 04-04-2015 08:59 AM

Nice job Mike,
Paulie be good.........
Posted from my iPhone/Mobile device

PRBuzz 04-04-2015 09:11 AM

Quote:

Originally Posted by Eric Roach (Post 1069472)
Good Lord, then that is some seriously impressive reflective paintwork. Nice job!

Don't think you will see how O.D. does that paint job posted? Trade secret and lots of R&D. Just MHO

O.D. Mike 04-12-2015 08:22 AM

I will say that when I'm ready to show how I do the paint job, I will make a video and show it here first. I appreciate being a part of this forum.


All times are GMT -5. The time now is 08:12 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com