Striper Talk Striped Bass Fishing, Surfcasting, Boating

Striper Talk Striped Bass Fishing, Surfcasting, Boating (http://www.striped-bass.com/Stripertalk/index.php)
-   Plug Building - Got Wood? (http://www.striped-bass.com/Stripertalk/forumdisplay.php?f=19)
-   -   Holy Smoke....Literally!!! (http://www.striped-bass.com/Stripertalk/showthread.php?t=29373)

Bob Thomas 02-22-2006 06:27 AM

Holy Smoke....Literally!!!
 
I'm not sure what the *&^%*(^ happened but I was tying bucktail jigs tonight and some sort of chemical reaction happened.

I tied in a couple of bucktails onto the jig and put a little Zap CA, the pink stuff, on to seal the fibers. All of a sudden, there was smoke coming from the jig. It stopped after about 2 seconds of smoking so I finished the jig. This was the only jig this happened to out of the 15 I tied!

So I'm putting away my stuff and empty the trash bin from the vise. I pull out some "Stuck" tail and get the Zap on my skin and it starts burning again!! Stopped fairly quick and did not even leave a mark but WEIRD!!

Any ideas?? :yak: :conf: :conf:

Raven 02-22-2006 06:32 AM

yes..
 
i'd call the manufacturers and ask for their R&D department.
A scientist should be able to explain the phenomenon.

nightfighter 02-22-2006 06:37 AM

Yup. And their marketing dept, who should be sending you a case of the stuff, while being thankful their product didn't burn your house down!! It's all about the delivery!:as:

capesams 02-22-2006 06:54 AM

does it on cork tape too.....only when you pour it on in mass, it heats up as it cures just like 5 min.poxy in a small container...no biggie.

justplugit 02-22-2006 10:30 AM

like CS says,-- just don't be breathin in the fumes.

FlukinUki 02-22-2006 01:04 PM

I had a similar experience when trying to glue 2 pieces (different colors) of zonker strip together. I applied it to 1 strip and as I was getting ready to mate the two together I started seeing smoke and there was a really putrid smell. That was the last time I tried to do that.

ThrowingTimber 02-22-2006 05:43 PM

which type thread were you using? And had you applied any other head cement or anything?

jkswimmer 02-22-2006 05:59 PM

Be careful the smoke will glue your eyelids shut. Almost happened to me.

FlukinUki 02-22-2006 08:04 PM

Quote:

Originally Posted by jkswimmer
Be careful the smoke will glue your eyelids shut. Almost happened to me.

I guess that better than having them glued open :eyes: :shocked:

nightfighter 02-22-2006 09:06 PM

[QUOTE=capesams]does it on cork tape too.....only when you pour it on in mass, it heats up as it cures just like 5 min.poxy in a small container...no biggie.[/QUOTE

Sure, I've smoked two part mixtures before when mixed hot, Steve, but isn't the Zap right out of the tube?

My rocket scientist little brother mixed a HOT batch of resin and had it on the hull when it combusted:buds: That was a fun phone call!


All times are GMT -5. The time now is 09:27 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright 1998-20012 Striped-Bass.com