what Clear coat
 

Do You use.
im useing envirotex, But may swap it out for sumtin else

Crystal Sheen, it is a crystal clear deep gloss finish. More durable than Envirotex. No bubble issues and I use 1 coat.

Bernzy

enviromatex still.:)

DUDE !!! envirotex is weak ,, Interrior use...too rubbery..If you get a pointer u can peel like a grape.....I dropped this needle in the surf yesterday on a dropping tide..(sinker) I tried to pick it up in between waves but I couldn't reach it..Its was between three barnicle incrusted rocks ,going back and forth in the surf dissapearing under one of them ..I fished the tide out and went back to get it after the water line went down ...I couldn't believe my eyes...Not a scratch...this is an envirotex plug I peeled and did over...Clear coat is very good too ..No more blowing bubbles either ...that will make you mental or in your case worse.. System three is marine quality.. Be careful if you break out in a rash on your forehead or inside of your forearms ,you have become sensitive to it and might have problems ever working with it again ..No Lie..nasty stuff !!! Don't get it on your skin ...I'm using SB112 because system 3 rep steared me that way..(used on surfboards)...My bubba and yours is using clear coat with great success....... u owe me 5 for all this...I owed u 3...u still owe me 2..

Been using epoxy but now i've seen the light ,besides epoxy doesn't really hold up after tossing 'em a lot,at least for me.Anyway, been doing some "testing" fer someone else and after seeing how the stuff holds up that's what i'm going to.:cool: "tRB"

Depends on what your looking for, Polys. Varnishes, Urethanes ,Enamels,or Pelucid but that will kill you quicker , most of all use a respirator . Happy Clear Coating.........

wee wee coat. :D

I think you would have a longer life expectancy by smoking some plutonium than using that stuff.

Think WATER based...

Water BASE in Water not Kosher

DO your homework is all I gonna SAY.
It WORKS.

water base in water , like water base paints in water not the best thing, there is better do your HOME WORK.If it works for you fine but there is BETTER.......:D

I found what works for me :D

SUPER :happy: ;) :D

I fish mine NAKED, it works for me :D

I don't think I want to see u in hip boots naked, I got enough nitemares now.:hidin:

SLIP , Have your wife make some more BROWNIES PLEASE, Are they water base.. THANKS. For all of you who don't know SLIPS wife makes the BEST BROWNIES.....

YEH! she does, w/nuts too....

yeah slip when da next plug getothingie???

camon Bugger ,,Habs,,what are u using ..I know what habs is using he was pretty clear ...spill ya guts salty ..I spilled !!!!

Yeah Bugger, Fess up:smash:

hahahahahahahahahahahaaaaaaaaaaaa

NEVER :bshake: :bshake: :devil: :devil: :devil: :devil:

Pelucid :yak: :yak4: :yak6: :yak5:

I was messing with that stuff a couple years ago, and its baaaad.
Not worth it

Thanks for sharing


:rocketem:

haha, he dunt even tell no one how he makes his popper moufs.:D :tm: :spam:

Bernzy I will share anything I got cept THAT.... There's only 2 people besides me that know what it is......

Cuz it took me 7 months of solid HARD work to get to it :D

All I gonna say is think WATER based. Do sum detective work and it will come...

awww shoot Christian you come here I SHOW you that....no secret :D

k im comming....... with an empty backpack.:)

Tagger ,NO one knows what I'm using nor do I care about anyone ELSE........ No water BASE for ME......

hey bernzy, Check your PM'S I will HELP you out, 10 repete 10 years of hard WORK . This finish is TIME tested and PROVEN..As well as the PLUGS.:D ;) :happy: :cheers: :btu: :btu: :bounce: :bshake:

Hab's, I checked my PM's That was very kind of you.Thank you very much. You da man.
:happy: :cheers: :thanks:

Bernzy

yer better off not using that stuff.
thanks for ripping one of My dannys apart and copying it, Nice
I dont mind But My time in is alot longer than You
Like it was said to Me last week on the sand when I seen the needle By You looks alot like some of Mine.
I think Mike F put it well on another Board.
Its a shame cause Guys like You make Guys and others not post thier work due to being ripped off and sold

always gotta be a JOKER...nothing else to rip me about right?

:smash:

Hey Dave take a HIKE.

That's MY body MY design. And I ain't sayin it AGAIN.

You wanna rip me? I can sling it just as bad.... YOU copied BEACHMASTER.

Gimme a break. I'm done listening to your horsecrap. :(

You know I gotta say a few things here.

Right now I'm pretty steamed cuz Dave YOU got BIG nuts to say what you did here. My new needlefish is MY design, it came out of hours of work to get the shape I wanted. It actually started when I was doing a new template for the MAKATI design I been doing for the last 6 months on the lathe. I needed a new template for the new duplicator and started to do it but decided instead to change the front of it instead. NOTHING whatsoever to do with your stuff. Neither is the stubby 1 oz one that PRECEDED the 2.5 oz one. Your needle I have here is so far different it's laughable.

And for the record I can account for every needle that has been done, so I know who had what to SAY. All I'm going to say is SAD :(
Shame on you for publicly ripping something I spent hours and hours designing and getting the weighting right etc.

And shame on you for trying to discredit me on my Danny swimmer to begin with. It's like I said in the private mail to you before....I considered you a FRIEND. But you are so short sighted all you could say is I copied YOUR plug. WRONG. Wanna come see the cut up blanks? Gibbs and LEX? They're HERE.
Anyone who can say that they haven't taken something apart to see how someone else did something is lying. It's HOW you make your product BETTER. It's HOW YOU LEARN. Wanna compare the plug lengths, lip placement, lips, grommets, SHAPE,, hook size, hardware, weight size and technique? They don't match.

All it seems you wanna do is publicly trash my work. SAD.

You copied Beachmaster from what I can see....does he or anyone else rip you publicly?

Get off your high horse. I'm off mine.

Hey whats a good safe durable finish....I'm not making plugs anymore ..I started a sx toy factory..u can pm me .....thanks ..and get your free toy ..

I did really ,I think My plugs are a little fat for that dont you think.
as far as black and gold goes, been using it for ever.
You cut up one of My plugs and as far as I can see You took My shape.

:laughs:

Will you guys both take your horses elswhere please.

Bassmaster, people are growing tired of your whining about others copying your stuff especially me.

#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&, your multiple posts teasing him with you bragging about cutting up his plugs whether it's true or not don't fan the flames at all I'm sure :rolleyes: You know it doesn't take much to get a rise out of him.

Both of you need to grow up and act like adults. We have a seventeen year old here that makes you 2 look like you guys are still in diapers :smash: Maybe I should ask Christian to moderate the forum if it's OK with him and John.

#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^&, this is a pretty bold statement = "Anyone who can say that they haven't taken something apart to see how someone else did something is lying."

Are you specifically referring to saltwater plugs used to catch bass and blues? Is this just someone that is only in it for the business end to do it commercially?
I personally never took apart a plug to copy it, usually you can tell where weighting is and measurements are easy to take without having to cut something apart. I have heard of Xraying plug also. I'm sure many others haven't cut up plugs either. but I must be lying ;)

Slip it was a general statement.

I'm not replying to this drivel anymore. That was a JOKE a long time ago. This isn't. :(

Everyone seems to want to throw BARBS...not me. see ya guys.

:( :( :( :( :( :( Awwwww:( :( ya care about me don't ya Hab ? :(